Selectează o Pagină

Sa de bransament Electrosudabila

SA UNI

Sa de bransament Electrosudabila SA UNI

Spigot Saddles SA UNI
For integration of a branch line in PE pipelines –unpressurised or under operating pressure. Compact fitting made of HD-PE. Saddle with exposed heating element for optimal heat transfer. Outlet spigot for processing with FRIALEN couplers MB or UB. Suitable for all pipe diameters in the given range.

Assembly with clamping unit UNITOP (see Product Range FRIATOOLS Ref.-No. 613385).

Tapping in unpressurised condition with FRIATOOLS tapping kit FWAB XL (see Product Range FRIATOOLS).

Pressure test of saddles fusion is possible before tapping via integrated pressure nozzle and pressure test adaptor FWDPA (see Product Range FRIATOOLS Ref.-No. 613596).

Examples see application pictures.

For tapping under pressure, please contact our hotline: +49 621 486-2325.

PE 100 SDR 11

Maximum working pressure 16 bar (water) / 10 bar (gas)

SKU d1 d2 BX PU L t B1 B2 Drilling
Ø da		 Weight kg
616553 250-280 90 5 40 130 79 260 279 65 1,465
616554 250-280 110 5 40 140 82 260 279 84 1,610
616555 250-280 125 5 40 146 87 260 279 95 1,790
616556 250-280 160 5 40 158 98 260 279 123 2,180
616557 315-400 90 5 40 130 79 280 279 65 1,485
616558 315-400 110 5 40 140 82 280 279 84 1,630
616559 315-400 125 5 40 146 87 280 279 95 1,810
616560 315-400 160 5 40 158 98 280 279 123 2,190
616561 450-900 90 5 40 130 79 307 279 65 1,500
616562 450-900 110 5 40 140 82 307 279 84 1,645
616563 450-900 125 5 40 146 87 307 279 95 1,820
616564 450-900 160 5 40 158 98 307 279 123 2,200

FRIALEN safety fittings can be fused to pipes SDR 11 – SDR 26. Other SDR-stages on request. Please observe the marking directly at the product, which is mandatory.

DVGW-Registration-No.: DV-8611AU2250

Areas of Application

Instead of cost-intensively integrating a T-piece, a branch or vent can be very comfortably created using the FRIALEN spigot saddle SA-UNI. The spigot outlet can be fused with FRIALEN couplers MB or UB.

Assembly Instructions

The saddle is clamped onto the pipe with the UNITOP clamping device (see FRIATOOLS product range). The clamping device UNITOP is an universal tool for all SA-UNI dimensions. Please read the assembly and operating instructions for the clamping device UNITOP.

The fusion of the HD-PE distribution pipes and the house connections with FRIALEN-Spigot Saddles SA-UNI takes place by FRIALEN-fusing – leakproof and longitudinally strong.

The saddle and the outlet spigot have to be prepared according to the general installation instructions (see assembly instruction FRIALEN-XL for laying large pipes and relining pipe networks). This involves removing the oxide skin and cleaning the pipe covered by the saddle.

For tapping of pipes without pressure please use the

FRIATOOLS tapping equipment FWAB XL. Please refer the assembly and operating instructions of the drilling device FWAB XL / FWAB ASA. The fusion and tapping of pipes under pressure is possible with special tapping equipment. Please contact our applications engineers.

Good reasons for using the

FRIALEN Spigot Saddle SA-UNI:

  • Compact construction
  • HD-PE saddle with exposed heating element for optimal heat transfer
  • Low tapping forces
  • Burr-free and almost flush tapping for maximum hydraulic performance
  • Leakage free tapping possible by means of a shut off element
  • Extra wide fusion zone
  • Additional barcode for tracing back the underground fitting (Traceability-Coding)
  • Before tapping the pipe a leak test can take place with the pressure testing device (FWDPA SA)
  • Touch proof electric contacts
  • Easy and safe assembly by top-loading with the UNITOP clamping device.
  • Fusion indicators for visual fusion control
  • Durable batch marking
  • Individually wrapped for dirt protection