Selectează o Pagină

Sa de bransament Electrosudabila

SA XL

Sa de bransament Electrosudabila SA XL

Spigot Saddles SA VL
For integration of a branch line or vent in PE pipelines with large diameters –unpressurised or under operating pressure. Compact fitting made of HD-PE. Saddle with exposed heating element for optimal heat transfer. Outlet spigot for processing with FRIALEN couplers MB or UB.

The SA VL spigot saddle is assembled using a FRIATOOLS vacuum pump (see left application picture; order no. 613827) and the corresponding FRIATOOLS plunger (see Product Range FRIATOOLS).

Tapping in unpressurised condition with FRIATOOLS tapping kit FWAB (see right application picture and Product Range FRIATOOLS) or, using an additional shut-off valve, under operating pressure using commercially available drilling equipment (we recommend Hütz & Baumgarten: www.huetz-baumgarten.de).

For tapping under pressure, please contact our hotline: +49 621 486-2325.

PE 100 SDR 11Maximum working pressure 16 bar (water) / 10 bar (gas)

PE 100 SDR 11

Maximum working pressure 16 bar (water) / 10 bar (gas)

SKU d1 d2 BX PU L t h B1 B2 Drilling
Ø da		 Weight kg
616469 400 225 1 4 263 210 403 483 530 172 14,700
616779 400 250 1 4 261 210 417 483 530 187 15,200
616780 450 225 1 4 267 210 421 530 530 172 17,500
616781 450 250 1 4 272 210 426 530 530 187 18,000
616391 500 225 1 4 265 210 388 521 530 172 14,500
616782 500 250 1 4 263 210 380 521 530 187 15,500
616783 500 280 1 4 265 210 388 521 590 225 15,600
616784 500 315 1 4 268 210 446 573 590 254 21,600
616392 560 225 1 4 263 210 402 577 530 172 15,700
616785 560 250 1 4 263 210 398 577 530 187 17,000
616786 560 280 1 4 265 210 404 577 590 225 17,000
616787 560 315 1 4 268 210 402 564 590 254 19,800
616788 560 355 1 4 260 210 451 618 630 286 26,000
616789 560 400 1 4 260 210 451 618 630 322 27,200
616393 630 225 1 4 265 210 422 634 530 172 17,000
616790 630 250 1 4 267 210 419 634 530 187 17,500
616791 630 280 1 4 263 210 420 634 590 225 18,000
616792 630 315 1 4 265 210 417 621 590 254 20,900
616793 630 355 1 4 269 220 422 616 630 286 23,800
616794 630 400 1 4 267 220 419 616 630 322 25,000
616394 710 225 1 4 270 210 447 712 530 172 20,500
616795 710 250 1 4 265 210 437 712 530 187 22,100
616796 710 280 1 4 268 210 445 712 590 225 21,500
616797 710 315 1 4 268 210 439 694 590 254 23,800
616798 710 355 1 4 285 220 457 694 630 286 28,500
616762 710 400 1 4 275 220 447 694 630 322 29,500
616395 800 225 1 4 270 210 381 643 530 172 17,300
616799 800 250 1 4 275 210 384 643 530 187 18,600
616800 800 280 1 4 268 210 382 643 590 225 18,600
616801 800 315 1 4 268 210 377 629 590 254 20,500
616802 800 355 1 4 290 220 483 772 630 286 31,200
616803 800 400 1 4 275 220 468 772 630 322 31,600
616396 900 225 1 4 268 210 396 714 530 172 19,000
616804 900 250 1 4 278 210 402 714 530 187 20,700
616805 900 280 1 4 268 210 396 714 590 225 20,300
616806 900 315 1 4 269 210 393 700 590 254 23,000
616807 900 355 1 4 305 220 429 700 630 286 27,300
616808 900 400 1 4 275 220 399 700 630 322 28,000
616397 1000 225 1 4 270 210 396 653 530 172 18,000
616809 1000 250 1 4 280 210 366 653 530 187 19,300
616810 1000 280 1 4 270 210 361 653 590 225 19,000
616811 1000 315 1 4 270 210 358 642 590 254 21,000
616812 1000 355 1 4 305 220 444 774 630 286 30,800
616813 1000 400 1 4 278 220 417 774 630 322 31,300
616384 1200 225 1 4 270 210 346 655 530 172 17,500
616814 1200 250 1 4 284 210 354 655 530 187 19,200
616815 1200 280 1 4 270 210 345 655 590 225 18,600
616816 1200 315 1 4 270 210 343 645 590 254 20,800
616817 1200 355 1 4 305 220 413 759 630 286 29,600
616818 1200 400 1 4 278 220 385 759 630 322 30,300

For other dimensions refer to our new product Spigot Saddle SA UNI.

FRIALEN safety fittings can be fused to pipes SDR 11 – SDR 17.6. Other SDR classes on request. Please observe the marking directly at the product, which is mandatory.

PE 100 SDR 17Maximum working pressure 10 bar (water) / 5 bar (gas)

PE 100 SDR 17

Maximum working pressure 10 bar (water) / 5 bar (gas)

SKU d1 d2 BX PU L t h B1 B2 Drilling
Ø da		 Weight kg
616378 1000 160 1 4 300 249 390 654 530 123 17,350
616383 1200 160 1 4 300 250 375 655 530 123 17,200

For other dimensions refer to our new product Spigot Saddle SA UNI.

FRIALEN safety fittings can be fused to pipes SDR 11 – SDR 17.6.

Other SDR classes on request. Please observe the marking directly at the product, which is mandatory.

Areas of Application

  • Create highly economical branches!

Instead of cost-intensively integrating a T-piece, a branch or vent can be very comfortably created using the new FRIALEN spigot saddle SA VL.

Assembly Instructions

A simple assembly, comfortable handling and short processing time characterise the optimised and construction site-appropriate clamping method for large saddle component parts.

  • Branch saddle as branch: Your benefit – simple assembly!

The spigot saddles SA VL permit creating also large-volume branches at main pipes – unpressurised or under operating pressure – with less effort, minimal underground work and above all without interrupting the supply.

The saddle can be fixed at any position on the pipe. Thanks to the clamping method specifically developed for SA VL, only access to the covered saddle area is required. Specifically in the case of connections to existing pipelines, the bedding in the pipeline zone is only disturbed as absolutely necessary.

  • Vacuum clamping technology: Your benefit – comfortable handling!

The clamping force of the saddle required for fusion and built-up of the joining pressure is applied by a vacuum. This only requires a compressor usual for construction sites and the VACUSET. Out-of-roundnesses and shape deviations of the pipe usually seen at construction sites can be bridged by the clamping method.

But it is above all the required space in the pipe trench – and thus cost-intensive underground work – which is minimised for access to the pipe.

The tapping diameter is almost identical with the pipe’s diameter of the outlet spigot such that pressure losses are minimised.

Thanks to the use of preheating technology, the two joining partners (pipe surface and saddle area) are uniformly adjusted.

  • Your benefit: Little time required!

Commissioning is possible with only a few actions. Short assembly and fusion times, short cooling times and a quick tapping permit a branch to be completed in almost no time at all!

Good reasons for using FRIALEN Spigot Saddle SA VL:

  • Compact construction
  • HD-PE saddle with exposed heating element for optimal heat transfer
  • Low tapping forces
  • Burr-free and almost flush tapping for maximum hydraulic performance
  • Leakage free tapping possible by means of a shut-off element
  • Extra wide fusion zone
  • Additional barcode for tracing back the underground fitting (Traceability-Coding)
  • Touch proof electric contacts
  • Easy and safe assembly by vacuum clamping technology
  • Preheating technology for optimum alignment of the joining partners
  • Fusion indicators for visual fusion control
  • Durable batch marking
  • Individually wrapped for dirt protection