Selectează o Pagină

Sa de bransament Electrosudabila

SA

Sa de bransament Electrosudabila

Spigot Saddles
Compact fitting in HD-PE, saddle with exposed heating element for optimal heat transfer and outlet spigot for use with FRIALEN couplers MB or UB. Swarfless tapping in the depressurised state by means of commercial drilling units (we recommend Hütz & Baumgarten (www.huetz-baumgarten.de)).

For tapping under pressure, please contact our hotline: +49 621 486-2325.

PE 100 SDR 11

Maximum working pressure 16 bar (water) / 10 bar (gas)

SKU d1 d2 BX PU d3 L t h B1 B2 Drilling
Ø da
Weight kg
612757 63 32 20 360 22 100 44 171 108 118 20 0,330
612759 63 50 20 360 37 113 55 184 108 118 36 0,370
615020 75 50 15 270 38 82 55 167 110 125 36 0,430
615285 90 32 20 160 21 103 44 207 155 150 20 0,700
612819 90 63 20 160 50 103 63 207 155 150 46 0,720
615334 110 32 12 96 24 125 51 238 178 180 20 0,788
615031 110 50 12 96 39 132 60 245 178 180 36 0,816
612760 110 63 12 96 49 150 81 263 178 180 46 0,868
615411 110 90 12 96 70 115 79 228 165 190 65 0,960
615087 125 32 12 96 21 109 44 248 190 185 20 0,945
612761 125 63 12 96 47 109 63 248 190 185 46 0,990
615412 125 90 12 96 70 116 79 243 185 205 65 1,080
615584 125 110 10 80 86 116 82 243 185 205 84 1,150
612886 160 32 8 64 21 126 44 289 223 265 20 1,440
612762 160 63 6 48 47 140 63 303 223 265 46 1,520
615413 160 90 2 36 70 140 79 303 223 265 65 1,640
615739 160 110 2 36 86 140 82 303 223 265 84 1,765
615585 160 125 2 36 98 140 87 303 223 265 95 1,880
612763 180 63 6 48 47 109 63 291 240 195 46 1,190
615414 180 90 2 36 70 116 79 312 241 285 65 1,820
615948 180 110 2 36 86 136 82 319 241 285 84 1,960
615740 180 125 2 36 98 141 87 324 241 285 95 2,110
612764 200 63 5 40 47 109 63 311 250 195 46 1,260
612765 225 63 5 40 47 109 63 336 255 195 46 1,210
615415 225 90 5 40 70 130 79 358 284 279 65 1,950
616044 225 110 5 40 86 140 82 368 284 279 84 1,960
616045 225 125 4 32 97 146 87 374 284 279 95 2,240
616046 225 160 4 32 125 157 98 385 284 279 123 2,580

FRIALEN-Safety Fittings can be fused to pipes of SDR stages 11 to 17.6. Saddle parts d 63 can only be fused to pipes of SDR stage 11. Minimum wall thickness s min ≥ 3 mm. Other SDR-stages on request. Please observe the marking directly at the product, which is mandatory. DVGW-Registration-Nos.: DV-8601AU2248 and DV-8606AU2249

Areas of Application

The FRIALEN-Spigot Saddles SA are used for tapping of depressurised gas- and waterpipes as well as for pressure drainage. The branch line is connected with the outlet spigot by using a FRIALEN coupler UB.

Assembly Instructions

The fusion of the HD-PE distribution pipes and the house connections with FRIALEN-Spigot Saddles SA takes place by FRIALEN-fusing –leakproof and longitudinally strong.

The saddle and the outlet spigot have to be prepared according to the general installation instructions (see “Assembly Instructions” for “FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This involves removing the oxide skin and cleaning the pipes covered by the saddle and the coupler.

Swarfless tapping up to Ø 46 mm, from Ø 65 to Ø 123 mm extremely swarfreduced by using the tapping equipment of Hütz + Baumgarten.

For pipes without pressure spigot saddles SA can be used as a T-piece with a reduced outlet.

For tapping the main line under operating pressure, please contact our Application Engineering Department.

Good reasons for using the FRIALEN-SA:

  • Compact construction
  • exposed heating element for optimal heat transfer
  • Preassembled unit without loose parts
  • Nearly swarfless tapping by tapping equipment of Hütz + Baumgarten
  • Low tapping power
  • Burr – and nearly ledge – free tapping for a maximum of hydraulic power.
  • Leakage free tapping possible by means of a shut off element
  • Extra wide fusion zone
  • Additional barcode for tracing back the fitting (Traceability-Coding)