Sa de inchidere si ranforsare
Repair and Reinforcing Saddles
Compact fitting consisting of one repair saddle and one reinforcing saddle for the repair of minor pipe damage. With exposed heating elements for optimal heat transfer.
VVS
PE 100 SDR 11
Maximum working pressure 16 bar (water) / 10 bar (gas)
| SKU | d1 | d2 | BX | PU | t | H | B1 | B2 | Weight kg |
|---|---|---|---|---|---|---|---|---|---|
| 615164 | 90 | 50 | 24 | 192 | 21 | 148 | 155 | 150 | 0,920 |
| 615165 | 110 | 50 | 16 | 128 | 21 | 170 | 178 | 180 | 1,162 |
| 615166 | 125 | 50 | 15 | 120 | 21 | 183 | 190 | 185 | 1,360 |
| 615168 | 160 | 50 | 10 | 80 | 21 | 218 | 225 | 195 | 1,670 |
| 615169 | 180 | 50 | 6 | 48 | 21 | 238 | 240 | 195 | 1,810 |
| 615170 | 200 | 50 | 5 | 40 | 21 | 258 | 250 | 195 | 1,820 |
| 615171 | 225 | 50 | 5 | 40 | 21 | 283 | 255 | 195 | 1,900 |
FRIALEN-Safety Fittings can be fused to pipes of SDR stages 11 to 17.6. Other SDR-stages on request. Please observe the marking directly at the product, which is mandatory. DVGW-Registration No.: DV-8606AU2249
Areas of Application
The FRIALEN-Repair and Reinforcing Saddles are used for the repair of minor pipe damages.
Assembly Instructions
The fusion of the HD-PE pipe with the FRIALEN-Repair and Reinforcing Saddle takes place by FRIALEN-fusing – leakproof and longitudinally strong.
In order to avoid discharge of media, the leak has to be sealed with a separate plug (≤ d2).
Both HD-PE saddles have to be prepared according to the general installation instructions (see “Assembly Instructions” for “FRIALEN-Safety Fittings for house connections and distribution pipes up to d 225”). This includes removing the oxide layer and cleaning the pipe covered by the saddles.
Good reasons for using the FRIALEN-VVS:
- Compact construction
- HD-PE saddle with exposed heating element for optimal heat transfer
- Sealing area free of heating wires
- Preassembled unit without loose parts
- Extra wide fusion zone
- Additional barcode for tracing back the fitting (Traceability-Coding)